A laugh-out-loud commercial for a babysitting app

Eric Thayne • July 1, 2019

We couldn't say "no" to this one

Sometimes an idea makes you chuckle and you know you're going to go all in on it and help make it happen. That's exactly what happened when Samuel Ebat pitched our co-owner, Paul Boyer, the idea for his next project -- a babysitter app commercial set in an alternative version of 1989.


The payoff of the commercial was what sold Paul. Sam described a light show coming out of a couple's car as they start to get physical paired with cheeky narration that says, "If your parents had access to the most trusted babysitter app back then, maybe you would have had another sibling." It was too funny and presented too many interesting challenges to resist.


Signing on as cinematographer

Sam asked Paul if he wanted to come on to the project as a DP and co-producer. Paul jumped in with both feet. This commercial appealed to Paul as a fun way to push the creative envelope since it was a spec ad. Without an agency or client to please, there was room to be adventurous. And the cinematography of this ad was going to look cool if they did it right.


Discussing his instant attraction to this project, Paul said, "A few things excited me. The challenge of nailing natural-looking, lower-key lighting for the dialogue in the car. The opportunity to play with 80's nostalgia. The chance to bring that extra little bit of magic to a visually striking location. And of course the challenge of creating the final payoff of the disco lights coming out of the car." He knew it could be cool if done well.


Creative challenges and solutions

Every shoot, every project is a puzzle with its own set of challenges. On this commercial, the big challenges for the cinematography were:


  1. Shooting in low light
  2. Capturing a 1980's-inspired look
  3. Powering and motivating light
  4. Nailing the final lighting effect in camera


Shooting in low light

Digital cinema cameras often struggle to produce clean, natural-looking shadows. Too often, the shadows dance with ugly digital noise, even when using some supposedly high-end cameras.


Paul and Samuel focused on finding the right camera system for the job. Not surprisingly, they landed on a Sony body after several tests. Said Paul, "Sony's digital sensors are just on another level for this sort of thing. We didn't have a massive crew to bring light levels way up, so that we could bring the shadows down later in post without creating noise."


The Sony A7iv they used, which has the same sensor as its bigger cousin, the Sony FX6, which they also tested, had a small form factor that made it easy to work with in the confined space of a compact 80's sedan.


The camera op on this project, Jonathan Allison, brought lots of experience exposing night scenes on the Sony A7 cameras. "He really knew the sensor's sweet spot, how far to push the exposure to make it work in the editing room," said Paul. This gave Samuel the freedom to focus on the bigger picture of guiding performances and protecting the overall vision. Paul also had the freedom to focus on the nuances of complimenting the story with light.


80's inspired look

While Sam and Paul were excited for the low-light performance of the Sony, and even bought themselves more light sensitivity with a set of Sony G-Master prime lenses, they didn't want a super sharp digital look. Samuel pointed out, "You have to maintain the fantasy of the piece. It would have made no sense at all to shoot an 80's throwback commercial that looked like something out of the Fast & Furious franchise. It had to look filmic. It needed softer, bloomy-er highlights."


They got this look with a simple and cost-effective 1/8 black mist filter from Vaxis made especially for the popular Tilta Mirage matte box system. The filter provided just enough diffusion to help create the 80's-inspired look. In editing, Sam punched up the halation even more. "We wanted the cinematography to feel a little bit magical but rooted in reality, " said Samuel. Wardrobe, props, and careful location scouting also played key roles in creating the 1980's illusion. 


Motivating light

Cinematography is about cheating. It's about artificially heightening the beauty of the imagery while making it look natural. The challenge of this location, a lookout point on the edge of a cliff in northeast Tacoma, WA, was that it didn't have any street lights. None. So all the light in the scene had to be brought in and powered by us.


"We wanted the light in the car to feel like a mix of moonlight and distant street light. We bought a 7-foot-tall light off of Amazon that looked little like an old-time street light. And then we used battery-powered Aputure b7c light bulbs to power it. When you watch the commercial, you totally buy that it's a street light. It doesn't read as a prop," said Paul. 


This practical light source was used to "motivate" additional lighting decisions. It determined where Paul and the crew placed additional lights for close ups and ambient light. By creating a temporary plywood base for the light, they were also able to move the light around and use it on the other side of the car in the guy's close up. "All it took was some sand bags to keep the light steady (it was a windy day) and fallen leaves to help the base blend in," said Paul.


To make sure that they had enough light for the evening, Paul brought an Aputure b7c charging case with eight bulbs. When one light went out, they would just replace it with a freshly charged bulb.


The larger lights they used for key, fill, and ambient light had to be powered too. Director and cinematographer went back and forth on whether to use a generator or one of the new portable power stations. Paul talked to a cinematographer friend, Bryan Gaver, who convinced him to try out a portable power station solution. He rented the Aputure Delta Pro Portable Power Station. It kept all of the lights on set running for a 6-hour shoot plus two hazers. And it had more than a days charge left over when they powered everything off.


Nailing the final lighting effect

This spot wouldn't work at all if the final light effect fell flat. The director and cinematographer were committed to creating the disco light show coming out of the car as an in-camera effect. Without a special effects budget, this choice was partly preference and partly necessity. Ultimately, the look came down to three elements: haze, DJ lights, and small automated disco lights.


"Hazing outside and inside of the car helped create distinct visible shafts of light. That's what I was after," said Samuel. It was challenging to get the impact they were after on a windy night but by carefully directing the haze over the car they were able capture their moment. More haze was added digitally to the foreground later to enhance the foggy feeling and make everything look natural. Samuel continued, "We brought two hazers. That was barely enough. If I had to do it again I would bring four. But we got the effect."


The filmmaking duo's commitment to camera tests paid off on this effect. Paul reminisced, "We tested this shot in my driveway, that's when we noticed that the light hitting the trees above the car was key to feeling the impact of the lighting effect. After that test, Samuel was committed to getting us a location with something overhead for the disco lights to bounce off of. It really made a difference." Hiding some small disco lights outside the car also played up the effect of the light on the tree branches.


What's next?

Samuel and Paul will be using this portfolio piece to strengthen their respective reels and share what they can do as they continue to build relationships with agencies, production companies, and filmmakers working in the greater Seattle region and across the country. Both filmmakers plan to take on more directing and commercial work as the right opportunities present themselves. 

 



 


By Eric Thayne • July 1, 2019
This is a subtitle for your new post
By Eric Thayne • April 15, 2019
Add a blog and update it regularly. It's a great way to stay in touch with site visitors.
By Eric Thayne • April 15, 2019
Add a blog and update it regularly. It's a great way to stay in touch with site visitors.